Address： No. A 1, Daqi Road, China (Boye) Conveyor Belt Industrial Zone
BAODING JINGBO RUBBER BELTS CO.,LTD
Introduction to the Characteristics of Several Raw Rubber Used in Heat-resistant Conveyor Belt
The appearance quality of heat-resistant conveyor belts is standard. The chemical industry standard HG_2297-92 of heat-resistant conveyor belts stipulates that the appearance quality of conveyor belts shall comply with GB_526. Therefore, the heat-resistant conveyor belt must meet
the appearance quality standard stipulated by GB 526.
Jingbo Rubber Co., Ltd. specializes in the production of conveyor belts for many years. Through years of careful research and exploration, we have visited many customers. Now we have put forward some suggestions to solve the causes of the appearance damage of heat-resistant conveyor belts for your reference. If there is something wrong, you are welcome to correct.
The models of heat-resistant conveyor belts mentioned in this paper only include T1 (below 100 C), T2 (not more than 120 C) and T3 (not more than 150 C).
Varieties of raw rubber used for covering rubber of heat-resistant conveyor belts: The quality and appearance of heat-resistant conveyor belts are different because of different kinds of raw rubber.
Styrene-butadiene rubber: Styrene-butadiene rubber is one of the most commonly used rubber materials for heat-resistant conveyor belts. Its technological properties are better, its vulcanization , calendering and mixing processes are better mastered, its appearance quality is better than that of ethylene-propylene rubber and chloroprene rubber, and its defects are less
than those of the two kinds of rubber.
Ethylene propylene rubber: Ethylene propylene rubber is also a commonly used rubber material
for heat-resistant conveyor belts, with better heat resistance. Ethylene propylene rubber can be
used for a long time in the environment of 150 C. The disadvantage is that the process
performance is poor and the adhesive of the covering rubber is general. Therefore, the rubber
surface of the conveyor belt made of Ethylene propylene rubber is generally not smooth enough
and has many bright scars.
Neoprene rubber: Neoprene rubber has general heat resistance, which is inferior to styrene-butadiene rubber and ethylene propylene rubber. Therefore, it is generally used in T1 conveyor belt (below 100 C), but it has good acid and alkali resistance. Nowadays, many chemical industries have strict requirements on conveyor belts, which can resist acid and alkali as well as heat. For some chemical industries with low heat resistance requirements, chloroprene rubber is a good choice.