Address： No. A 1, Daqi Road, China (Boye) Conveyor Belt Industrial Zone
BAODING JINGBO RUBBER BELTS CO.,LTD
Copyright © 2018 BAODING JINGBO RUBBER CO.,LTD All Rights Reserved 冀ICP备09014553号 Powered by www.300.cn
What kind of pattern conveyor
The pattern conveyor belt is composed of two parts: baseband and pattern. Due to the different transport materials and the transport of different sizes, the requirements of the pattern and height are also different. Common species such as the conveyor belt pattern: Chevron conveyor belt, V-shaped pattern conveyor belt, conveyor belt, fish bone pattern U shape pattern conveyor belt, conveyor belt, cylindrical pattern pitting pattern conveyor belt. Or according to user requirements design. Suitable for powder, granular, and bulk material transportation of less than 30 degrees inclination. Commonly used pattern conveyor belt is as follows: 1. Herringbone pattern
Features: on the surface of the belt is higher than the body of the "human" font pattern, but the pattern is also closed openings, each pattern can be divided into high, medium and low three. Application: suitable for less than 40 degrees angle of powder, granular, small pieces of material handling, but also transport material bags.
2. Striped pattern
Features: the strip surface with a horizontal strip of the strip pattern, the pattern is divided into high, medium and low three, each pattern can be divided into the form of spacing, dense and other forms.
Application: suitable for less than 30 degrees angle of horizontal transport packaging. If in the case of slot, can be replaced by three.
3. Granular pattern
Features: the surface with high granular pattern or concave body embedded with a body, can also be made of square hole shaped pits or prismatic shape and texture.
Use: the convex grain pattern is suitable for the soft packing material or needs to grasp the material transportation (such as the cardboard box) or the non slip transportation. Concave granular granular pattern suitable for less than 45 degrees angle of delivery.
4. Fan pattern
Features: on the surface with a semi fan-shaped (or 1/4 round) pattern. When the tape into the groove when the pattern of interference into fan-shaped (or semi circle), is a high pattern.
Application: suitable for less than 60 degree angle conveying powder, granular and massive material. The company can supply pattern conveyor belt width is less than 2400mm.
It is widely used in ports, mines, electric power, coal, building materials, concrete and grain to improve all kinds of materials.
Usage: suitable for the following 30 degrees below the bulk, loading of materials.
Features: to prevent the decline of materials, improve transport capacity.