>
News Center
>
How to maintain the chevron conveyor belt

 Copyright © 2018 BAODING JINGBO RUBBER CO.,LTD  All Rights Reserved                                                           冀ICP备09014553号                                                                         Powered by www.300.cn

Online customer service
Customer service hotline
400-0123-599
Customer service team:
在线客服
Wangwang:
QQ:
QQ:
QQ:
QQ:
QQ:
Service time:
8:00 - 20:00

How to maintain the chevron conveyor belt

[Abstract]:
The chevron conveyor belt during transportation and storage, should be kept clean to avoid direct sunlight or rain leaching. Avoid contact with acid, alkali, oil, organic solvents and other substances

The chevron conveyor belt during transportation and storage, should be kept clean to avoid direct sunlight or rain leaching. Avoid contact with acid, alkali, oil, organic solvents and other substances, and one meter away from the heating device.

The storage temperature should be maintained at 18-40 DEG C during storage, the relative humidity should be maintained between 50- 80%.

During storage, the conveyor belt should be placed into a roll, not folded, placed during turning once every quarter.

Different types and specifications of the conveyor belt should not be used together, the joint is the best method of bonding.

Conveyor belt type, structure, specification, number of layers should be selected according to the conditions of use.

Conveyor belt speed should not be greater than 2.5 m / s, the block is large, wear and tear of the material and the use of a fixed discharge device should be as low as possible.

The relationship between the diameter of conveyor drum and conveyor belt, the roller, the roller and the roller angle should be selected according to the design requirements of the conveyor.

The feeding direction along the direction of belt, in order to reduce the material falling on the conveyor belt impact should adopt the chute, reduce material falling distance. Conveyor belt material should shorten the distance between rollers and the buffer roller for leakage, with the adaptation of moderately soft block plate, so as to avoid gear plate is excellent, cut conveyor belt surface.