>
News Center
>
What are the methods of rubber conveyor belt

Information        Address        Recruit

Phtot

VR

LINKS:

Address: No. A 1, Daqi Road, China (Boye) Conveyor Belt Industrial Zone
Tel:+86-312-6784809(sale)  /  +86-312-8348888(factory)
Phone:+86-15175208899(sale)
Fax:+86-312-6784908(sale) /  +86-312-8349617(factory)  
Mailbox: 
info@hbjingbo.com (factory)  

 

保定京博橡胶有限公司

BAODING JINGBO RUBBER BELTS CO.,LTD

Profile        Speech        Culture

History        Cooperative        Honor

 Copyright © 2018 BAODING JINGBO RUBBER CO.,LTD  All Rights Reserved                                                           冀ICP备09014553号                                                                         Powered by www.300.cn

Online customer service
Customer service hotline
400-0123-599
Customer service team:
在线客服
Wangwang:
QQ:
QQ:
QQ:
QQ:
QQ:
Service time:
8:00 - 20:00

What are the methods of rubber conveyor belt

[Abstract]:
All the conveyor belt must be connected to the ring in order to use, so the quality of the conveyor belt directly affects the service life of the conveyor belt and conveyor line can run smoothly and s

All the conveyor belt must be connected to the ring in order to use, so the quality of the conveyor belt directly affects the service life of the conveyor belt and conveyor line can run smoothly and smoothly. The common methods of conveying belt joints are mechanical joints, cold bonding joints, hot vulcanizing joints and so on.

Conveyor mechanical joint method

Generally refers to the use of belt buckle joint, the joint method is convenient and economical, but the efficiency is low, easy to damage, the conveyor belt has a certain impact on the service life. PVC and PVG core flame retardant anti-static conveyor belt joints, generally 8 with the following products are used in this joint method. The 28%-45% is equivalent to the strength of the conveyor belt.

Conveyor belt cold bonding method

Cold bonding adhesive is used to connect. The joint approach than mechanical joints for high efficiency, more economic, should be able to have a good connection effect, but from a practical point of view, because the process is more difficult to grasp, also affect the adhesive on the quality of the joint is very large, so it is not very stable. The adhesive strength of the conveyor belt is equivalent to 40%-55%.

Heat vulcanizing joint method for conveyor belt

Practice has proved that it is the most ideal joint method, which can ensure the high joint efficiency, but also very stable. But there are many disadvantages, such as high cost, long time and so on. The mechanical strength of the 60%-80% is equivalent to the strength of the conveyor belt.